• Working width 405mm(16").
• Suitable for planning very short workpieces
• Equipped with a spiral cutterhead
• Feeding inverter with an additional gear reducer
• Meet the challenge of 100mm extra short single surface planing
STANDARD ACCESSORIES
• Angular planing device
• Extened table
• Special-designed control panel
• Special-designed thickness setting of workpiece
• Throw-away type T.C.T. spiral cutterhead
• Automatic lubrication system for the infeed chain
• Powered elevation of upper mechanism
• The table surface is hard chrome plated and precision ground for extremely smooth feeding and maximum wear resistance
• The dovetailed slideways on the table elevation assure outstanding rigidity and stability
• Extened table
• Special-designed control panel
• Special-designed thickness setting of workpiece
 |
 |
 |
|
Feeding inverter+gear reducer |
Bevel and angular helical cutthead Designed for gaining great cutting performing by use of bevel helical cutterhead device. |
Automatic lubricator The automatic lubricator delivers frequent lubrication oil to the caterpillar chain. |
| Model | GT-400J |
| Maximum Width Of Cut | 405mm ( 16" ) |
| Maximum Thickness Of Cut | 200mm ( 8" ) |
| Minmum Thickness Of Cut | 8mm |
| Minmum Lenght Of Cut | 100mm |
| Knife Nos. On Bottom Cutterhead | 120pcs |
| Knife Sizes | TCT 15x15x2.5mm |
| CutterHead Speed | 6000RPM |
| Variable Feed Speed | 8-40m/min |
| Dust Hood Outlet Diameter | 5" x 1 |
| Table Surface Area | 480mmx2170mm(extened table inclusive) |
| Buttom Cutterhead Drive Motor | 7.5HP |
| Feed Drive Motor | 2HP |
| Upper Mechanism Elevation Motor | 1/2HP |
| Machine Dimensions(LxWxH) | 1860x850x1650mm |
| Net Weight | 1300kg |
| Packing Dimensions(LxWxH) | 1940x930x1890mm |
| Gross Weight | 1450kg |
※ To ensure technological excellence, specifications are subject to change without prior notice。
