• Working width 635mm(25") / 762mm(30")
• Equipped with digital positioning control
• Equipped with NO. 1 helical cuttehead.
• Quick thickness setting device.
• Slideways are lubricated by central hand lubricator.
• Feeding inverter with an additional gear reducer.
STANDARD ACCESSORIES
• Well laid-out pressure spikes
• Fast knife replacement
• Fast and convenient belt tension adjustment.
• Automatic lubricator
• Feeding inverter
• Gear reducer
• Quick thickness setting(standard equipment on models GT-610A and GT-635ARD only. Optional for other models)
• Rear control device
• Centralized hand lubricator(standard equipment on models GT-610A and GT-635ARD only. Optional for other models)
• The four table rollers provide superior feeding performance
• Standard Y-delta motor starting
• Quick belt change for bottom cutterhead
• Automatic lubrication for feeding chain
• Automatic lubricator provides convenient lubrication to caterpillar chain slideways
• An air wrench is applied for removing or installing knives and saves knife change time.
• The upper and lower cutter heads are spiral cutter heads
• The table surface is hard chrome plated and precision ground for extremely smooth feeding and maximum wear resistance
• The dovetailed slideways on the table elevation assure outstanding rigidity and stability
• Sectional infeed rollers
 |
 |
 |
|
Well Laid-out pressure spikes The pressure spikes are in an overlapped layout with a minimum of gaps that hold the workpiece firmly and evening ensuring shake-free feeding, even for short workpiece. |
No.1 Helical cutterhead The helical cutterhead is precision machined Provides extremely fine surface of cut with minimum noise. The helical cutterhead is fitted with throw-away T.C.T knife bits. |
Digital positioning control The thickness of cut can be controlled by a digital positioning control. Once the preset position is reached, the table elevation stops automatically. |
 |
 |
 |
|
Automatic lubricator The automatic lubricator delivers frequent lubrication oil to the caterpillar chain. |
Feeding inverter Digital display and quick operation to reduce wear on mechanical gearbox. |
Gear reducer Reduce wear caused by temperature rise and improve efficiency of power transmission. |
| Model | GT-635ARD GT-760ARD |
| Maximum Width Of Cut | 635mm ( 25" ) 762mm(30") |
| Maximum Thickness Of Cut | 200mm ( 8" ) Option : 400mm, 500mm, 600mm(min thickness : 110mm) |
| Minmum Thickness Of Cut | 10m |
| Minmum Lenght Of Cut | 310mm |
| Knife Nos. On Bottom Cutterhead | 156pcs 114pcs |
| Knife Sizes | TCT 15x15x2.5mm TCT 30x12x1.5mm |
| Cutterhead Diameter | Ø126mm |
| CutterHead Speed | 5000RPM |
| Variable Feed Speed-inverter | 8-24m/min |
| Dust Hood Outlet Diameter | 6" X 2 |
| Table Surface Area | 27"x103" 32" x 103" |
| Top Cutterhead Drive Motor | 20( 25HP) 25( 30HP) |
| Buttom Cutterhead Drive Motor | 15( 20HP) 20(25HP) |
| Feed Drive Motor | 3HP 5HP |
| Upper Mechanism Elevation Motor | 1/2HP |
| Machine Dimensions(LxWxH) | 2700x1145x1720mm 2700x1310x1900 mm |
| Net Weight | 3000kg 3300kg |
| Packing Dimensions(LxWxH) | 2780x1240x1940mm 2780x1380x2200 mm |
| Gross Weight | 3500kg 3800kg |
※ To ensure technological excellence, specifications are subject to change without prior notice。
